深度解析MySQL启动时报“The server quit without updat

编程学习 2021-07-05 14:36www.dzhlxh.cn编程入门
这篇文章主要介绍了MySQL启动时报“The server quit without updating PID file”错误的原因,需要的朋友可以参考下

很多童鞋在启动mysql的时候,碰到过这个错误,

首先,澄清一点,出现这个错误的前提是:通过服务脚本来启动mysql。通过mysqld_safe或mysqld启动mysql实例并不会报这个错误。

那么,出现这个错误的原因具体是什么呢?

哈哈,对分析过程不care的童鞋可直接跳到文末的总结部分~

总结

狼蚁网站SEO优化,来分析下mysql的服务启动脚本

脚本完整内容如下:

#!/bin/sh
# Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB
# This file is public domain and comes with NO WARRANTY of any kind
# MySQL daemon start/stop script.
# Usually this is put in /etc/init.d (at least on machines SYSV R4 based
# systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql.
# When this is done the mysql server will be started when the machine is
# started and shut down when the systems goes down.
# Comments to support chkconfig on RedHat Linux
# chkconfig: 2345 64 36
# description: A very fast and reliable SQL database engine.
# Comments to support LSB init script conventions
### BEGIN INIT INFO
# Provides: mysql
# Required-Start: $local_fs $network $remote_fs
# Should-Start: ypbind nscd ldap ntpd xntpd
# Required-Stop: $local_fs $network $remote_fs
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: start and stop MySQL
# Description: MySQL is a very fast and reliable SQL database engine.
### END INIT INFO
# If you install MySQL on some other places than /usr/local/mysql, then you
# have to do one of the following things for this script to work:
#
# - Run this script from within the MySQL installation directory
# - Create a /etc/my.cnf file with the following information:
# [mysqld]
# basedir=<path-to-mysql-installation-directory>
# - Add the above to any other configuration file (for example ~/.my.ini)
# and copy my_print_defaults to /usr/bin
# - Add the path to the mysql-installation-directory to the basedir variable
# below.
#
# If you want to affect other MySQL variables, you should make your changes
# in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files.
# If you change base dir, you must also change datadir. These may get
# overwritten by settings in the MySQL configuration files.
basedir=
datadir=
# Default value, in seconds, afterwhich the script should timeout waiting
# for server start. 
# Value here is overriden by value in my.cnf. 
# 0 means don't wait at all
# Negative numbers mean to wait indefinitely
service_startup_timeout=900
# Lock directory for RedHat / SuSE.
lockdir='/var/lock/subsys'
lock_file_path="$lockdir/mysql"
# The following variables are only set for letting mysql.server find things.
# Set some defaults
mysqld_pid_file_path=
if test -z "$basedir"
then
 basedir=/usr/local/mysql
 bindir=/usr/local/mysql/bin
 if test -z "$datadir"
 then
 datadir=/usr/local/mysql/data
 fi
 sbindir=/usr/local/mysql/bin
 libexecdir=/usr/local/mysql/bin
else
 bindir="$basedir/bin"
 if test -z "$datadir"
 then
 datadir="$basedir/data"
 fi
 sbindir="$basedir/sbin"
 libexecdir="$basedir/libexec"
fi
# datadir_set is used to determine if datadir was set (and so should be
# *not* set inside of the --basedir= handler.)
datadir_set=
#
# Use LSB init script functions for printing messages, if possible
#
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions ; then
 . $lsb_functions
else
 log_success_msg()
 {
 echo " SUCCESS! $@"
 }
 log_failure_msg()
 {
 echo " ERROR! $@"
 }
fi
PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"
export PATH
mode=$1 # start or stop
[ $# -ge 1 ] && shift
other_args="$*" # uncommon, but needed when called from an RPM upgrade action
   # Expected: "--skip-networking --skip-grant-tables"
   # They are not checked here, intentionally, as it is the resposibility
   # of the "spec" file author to give correct arguments only.
case `echo "testing\c"`,`echo -n testing` in
 *c*,-n*) echo_n= echo_c=  ;;
 *c*,*) echo_n=-n echo_c=  ;;
 *)  echo_n= echo_c='\c' ;;
esac
parse_server_arguments() {
 for arg do
 case "$arg" in
  --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'`
     bindir="$basedir/bin"
   if test -z "$datadir_set"; then
    datadir="$basedir/data"
   fi
   sbindir="$basedir/sbin"
   libexecdir="$basedir/libexec"
  ;;
  --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'`
   datadir_set=1
 ;;
  --pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
  --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
 esac
 done
}
wait_for_pid () {
 verb="$1"   # created | removed
 pid="$2"   # process ID of the program operating on the pid-file
 pid_file_path="$3" # path to the PID file.
 i=0
 avoid_race_condition="by checking again"
 while test $i -ne $service_startup_timeout ; do
 case "$verb" in
  'created')
  # wait for a PID-file to pop into existence.
  test -s "$pid_file_path" && i='' && break
  ;;
  'removed')
  # wait for this PID-file to disappear
  test ! -s "$pid_file_path" && i='' && break
  ;;
  *)
  echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path"
  exit 1
  ;;
 esac
 # if server isn't running, then pid-file will never be updated
 if test -n "$pid"; then
  if kill -0 "$pid" 2>/dev/null; then
  : # the server still runs
  else
  # The server may have exited between the last pid-file check and now. 
  if test -n "$avoid_race_condition"; then
   avoid_race_condition=""
   continue # Check again.
  fi
  # there's nothing that will affect the file.
  log_failure_msg "The server quit without updating PID file ($pid_file_path)."
  return 1 # not waiting any more.
  fi
 fi
 echo $echo_n ".$echo_c"
 i=`expr $i + 1`
 sleep 1
 done
 if test -z "$i" ; then
 log_success_msg
 return 0
 else
 log_failure_msg
 return 1
 fi
}
# Get arguments from the my.cnf file,
# the only group, which is read from now on is [mysqld]
if test -x ./bin/my_print_defaults
then
 print_defaults="./bin/my_print_defaults"
elif test -x $bindir/my_print_defaults
then
 print_defaults="$bindir/my_print_defaults"
elif test -x $bindir/mysql_print_defaults
then
 print_defaults="$bindir/mysql_print_defaults"
else
 # Try to find basedir in /etc/my.cnf
 conf=/etc/my.cnf
 print_defaults=
 if test -r $conf
 then
 subpat='^[^=]*basedir[^=]*=\(.*\)$'
 dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`
 for d in $dirs
 do
  d=`echo $d | sed -e 's/[  ]//g'`
  if test -x "$d/bin/my_print_defaults"
  then
  print_defaults="$d/bin/my_print_defaults"
  break
  fi
  if test -x "$d/bin/mysql_print_defaults"
  then
  print_defaults="$d/bin/mysql_print_defaults"
  break
  fi
 done
 fi
 # Hope it's in the PATH ... but I doubt it
 test -z "$print_defaults" && print_defaults="my_print_defaults"
fi
#
# Read defaults file from 'basedir'. If there is no defaults file there
# check if it's in the old (depricated) place (datadir) and read it from there
#
extra_args=""
if test -r "$basedir/my.cnf"
then
 extra_args="-e $basedir/my.cnf"
else
 if test -r "$datadir/my.cnf"
 then
 extra_args="-e $datadir/my.cnf"
 fi
fi
parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server`
#
# Set pid file if not given
#
if test -z "$mysqld_pid_file_path"
then
 mysqld_pid_file_path=$datadir/`hostname`.pid
else
 case "$mysqld_pid_file_path" in
 /* ) ;;
 * ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;;
 esac
fi
case "$mode" in
 'start')
 # Start daemon
 # Safeguard (relative paths, core dumps..)
 cd $basedir
 echo $echo_n "Starting MySQL"
 if test -x $bindir/mysqld_safe
 then
  # Give extra arguments to mysqld with the my.cnf file. This script
  # may be overwritten at next upgrade.
  $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &
  wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$?
  # Make lock for RedHat / SuSE
  if test -w "$lockdir"
  then
  touch "$lock_file_path"
  fi
  exit $return_value
 else
  log_failure_msg "Couldn't find MySQL server ($bindir/mysqld_safe)"
 fi
 ;;
 'stop')
 # Stop daemon. We use a signal here to avoid having to know the
 # root password.
 if test -s "$mysqld_pid_file_path"
 then
  mysqld_pid=`cat "$mysqld_pid_file_path"`
  if (kill -0 $mysqld_pid 2>/dev/null)
  then
  echo $echo_n "Shutting down MySQL"
  kill $mysqld_pid
  # mysqld should remove the pid file when it exits, so wait for it.
  wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$?
  else
  log_failure_msg "MySQL server process #$mysqld_pid is not running!"
  rm "$mysqld_pid_file_path"
  fi
  # Delete lock for RedHat / SuSE
  if test -f "$lock_file_path"
  then
  rm -f "$lock_file_path"
  fi
  exit $return_value
 else
  log_failure_msg "MySQL server PID file could not be found!"
 fi
 ;;
 'restart')
 # Stop the service and regardless of whether it was
 # running or not, start it again.
 if $0 stop $other_args; then
  $0 start $other_args
 else
  log_failure_msg "Failed to stop running server, so refusing to try to start."
  exit 1
 fi
 ;;
 'reload'|'force-reload')
 if test -s "$mysqld_pid_file_path" ; then
  read mysqld_pid < "$mysqld_pid_file_path"
  kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL"
  touch "$mysqld_pid_file_path"
 else
  log_failure_msg "MySQL PID file could not be found!"
  exit 1
 fi
 ;;
 'status')
 # First, check to see if pid file exists
 if test -s "$mysqld_pid_file_path" ; then 
  read mysqld_pid < "$mysqld_pid_file_path"
  if kill -0 $mysqld_pid 2>/dev/null ; then 
  log_success_msg "MySQL running ($mysqld_pid)"
  exit 0
  else
  log_failure_msg "MySQL is not running, but PID file exists"
  exit 1
  fi
 else
  # Try to find appropriate mysqld process
  mysqld_pid=`pidof $libexecdir/mysqld`
  # test if multiple pids exist
  pid_count=`echo $mysqld_pid | wc -w`
  if test $pid_count -gt 1 ; then
  log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)"
  exit 5
  elif test -z $mysqld_pid ; then 
  if test -f "$lock_file_path" ; then 
   log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists"
   exit 2
  fi 
  log_failure_msg "MySQL is not running"
  exit 3
  else
  log_failure_msg "MySQL is running but PID file could not be found"
  exit 4
  fi
 fi
 ;;
 *)
  # usage
  basename=`basename "$0"`
  echo "Usage: $basename {start|stop|restart|reload|force-reload|status} [ MySQL server options ]"
  exit 1
 ;;
esac
exit 0

首先,定义相关参数

basedir=
datadir=
# Default value, in seconds, afterwhich the script should timeout waiting
# for server start. 
# Value here is overriden by value in my.cnf. 
# 0 means don't wait at all
# Negative numbers mean to wait indefinitely
service_startup_timeout=900
# Lock directory for RedHat / SuSE.
lockdir='/var/lock/subsys'
lock_file_path="$lockdir/mysql"

其中,

basedir 指的二进制压缩包解压后所在的目录,譬如/usr/local/mysql。

datadir 指的是数据目录

service_startup_timeout=900 定义mysql服务启动的时间限制,如果在900s中没有启动成功,则该脚本会退出。

lockdir='/var/lock/subsys'

关于/var/lock/subsys,网上的解释如下,后续会用到。

总的来说,系统关闭的过程(发出关闭信号,调用服务自身的进程)中会检查/var/lock/subsys下的文件,逐一关闭每个服务,如果某一运行的服务在/var/lock/subsys下没有相应的选项。在系统关闭的时候,会像杀死普通进程一样杀死这个服务。

通过察看/etc/rc.d/init.d下的脚本,可以发现每个服务自己操纵时都会去查看/var/lock/subsys下相应的服务。

很多程序需要判断是否当前已经有一个实例在运行,这个目录就是让程序判断是否有实例运行的标志,比如说xinetd,如果存在这个文件,表示已经有xinetd在运行了,否则就是没有,当然程序里面还要有相应的判断措施来真正确定是否有实例在运行。通常与该目录配套的还有/var/run目录,用来存放对应实例的PID,如果你写脚本的话,会发现这2个目录结合起来可以很方便的判断出许多服务是否在运行,运行的相关信息等等。 

判断basedir和datadir

# Set some defaults
mysqld_pid_file_path=
if test -z "$basedir"
then
 basedir=/usr/local/mysql
 bindir=/usr/local/mysql/bin
 if test -z "$datadir"
 then
 datadir=/usr/local/mysql/data
 fi
 sbindir=/usr/local/mysql/bin
 libexecdir=/usr/local/mysql/bin
else
 bindir="$basedir/bin"
 if test -z "$datadir"
 then
 datadir="$basedir/data"
 fi
 sbindir="$basedir/sbin"
 libexecdir="$basedir/libexec"
fi

其中,

mysqld_pid_file_path 指定pid文件的路径

-z string 判断字符串是否为空

如果basedir没有显示设置,则默认为/usr/local/mysql,这也是为什么很多mysql安装教程都推荐将mysql相关文件放到/usr/local/mysql下。

如果datadir没有显示设置,则默认为$basedir/data。

定义log_success_msg()和log_failure_msg()函数

首先,判断/lib/lsb/init-functions文件是否存在,如果存在,则使定义在init-functions文件中的所有shell函数在当前脚本中生效。

如果没有,则定义两个函数,一个用于打印成功日志,一个是打印错误日志。

在RHCS 6.7中,该文件并不存在,已被/etc/init.d/functions所替代。

#
# Use LSB init script functions for printing messages, if possible
#
lsb_functions="/lib/lsb/init-functions"
if test -f $lsb_functions ; then
 . $lsb_functions
else
 log_success_msg()
 {
 echo " SUCCESS! $@"
 }
 log_failure_msg()
 {
 echo " ERROR! $@"
 }
fi

传递参数

将第一个参数传递给mode,剩下的参数传递给other_args

PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin"
export PATH
mode=$1 # start or stop
[ $# -ge 1 ] && shift
other_args="$*" # uncommon, but needed when called from an RPM upgrade action
   # Expected: "--skip-networking --skip-grant-tables"
   # They are not checked here, intentionally, as it is the resposibility
   # of the "spec" file author to give correct arguments only.
case `echo "testing\c"`,`echo -n testing` in
 *c*,-n*) echo_n= echo_c=  ;;
 *c*,*) echo_n=-n echo_c=  ;;
 *)  echo_n= echo_c='\c' ;;
esac

解析配置文件中的参数

这个函数在脚本后面会涉及到。

主要涉及如下参数:--basedir,--datadir,--pid-file,--service-startup-timeout。

parse_server_arguments() {
 for arg do
 case "$arg" in
  --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'`
     bindir="$basedir/bin"
   if test -z "$datadir_set"; then
    datadir="$basedir/data"
   fi
   sbindir="$basedir/sbin"
   libexecdir="$basedir/libexec"
  ;;
  --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'`
   datadir_set=1
 ;;
  --pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
  --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;;
 esac
 done
}

判断my_print_defaults的位置

首先,它判断当前路径下的bin目录中是否存在该可执行文件,如果不存在,则再判断$bindir(通常指的是$basedir/bin)目录下是否存在。

如果还是没有,则会判断/etc/my.cnf是否存在并且可读,如果是,则判断该配置文件中是否指定了basedir参数,

如果指定了,则取出该参数的值,并判断该值对应的目录中是否存在bin/my_print_defaults可执行文件

最后一步,如果在上述目录中实在没发现my_print_defaults文件,

索性就将print_defaults设置为"my_print_defaults",寄希望于该命令在当前的PATH环境中。

# Get arguments from the my.cnf file,
# the only group, which is read from now on is [mysqld]
if test -x ./bin/my_print_defaults
then
 print_defaults="./bin/my_print_defaults"
elif test -x $bindir/my_print_defaults
then
 print_defaults="$bindir/my_print_defaults"
elif test -x $bindir/mysql_print_defaults
then
 print_defaults="$bindir/mysql_print_defaults"
else
 # Try to find basedir in /etc/my.cnf
 conf=/etc/my.cnf
 print_defaults=
 if test -r $conf
 then
 subpat='^[^=]*basedir[^=]*=\(.*\)$'
 dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf`
 for d in $dirs
 do
  d=`echo $d | sed -e 's/[  ]//g'`
  if test -x "$d/bin/my_print_defaults"
  then
  print_defaults="$d/bin/my_print_defaults"
  break
  fi
  if test -x "$d/bin/mysql_print_defaults"
  then
  print_defaults="$d/bin/mysql_print_defaults"
  break
  fi
 done
 fi
 # Hope it's in the PATH ... but I doubt it
 test -z "$print_defaults" && print_defaults="my_print_defaults"
fi

查找默认的配置文件

-r file 如果文件可读,则为真

#
# Read defaults file from 'basedir'. If there is no defaults file there
# check if it's in the old (depricated) place (datadir) and read it from there
#
extra_args=""
if test -r "$basedir/my.cnf"
then
 extra_args="-e $basedir/my.cnf"
else
 if test -r "$datadir/my.cnf"
 then
 extra_args="-e $datadir/my.cnf"
 fi
fi

解析配置文件中的参数

my_print_defaults的用法如下:

my_print_defaults --defaults-file=example.cnf client mysql

即读取配置文件中,client和mysql部分的参数配置,

具体在本脚本中,是读取mysqld,server,mysql_server,mysql.server四个部分的配置参数。

parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server`

设置pid file的路径

-z string 判断字符串是否为空

如果--pid-file没有在读取到的配置文件中设置或者脚本刚开始的mysqld_pid_file_path参数没有设置,

则pid file默认设置在datadir下,以主机名.pid命名。

如果该参数设置了,还需要进一步判断

如果该参数中带有斜杠,则代表给定的值带有路径,可直接使用。

如果该参数中没带路径,则代表给定的值只是pid的文件名,可将其设在datadir下。

#
# Set pid file if not given
#
if test -z "$mysqld_pid_file_path"
then
 mysqld_pid_file_path=$datadir/`hostname`.pid
else
 case "$mysqld_pid_file_path" in
 /* ) ;;
 * ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;;
 esac
fi

服务脚本start选项

首先,切换到$basedir中

其次,判断$basedir/bin中的mysqld_safe是否是可执行文件,如果是,则启动mysqld实例,如果不是,则报错退出。

那么,启动流程又是如何实现的呢?

首先,执行$bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &命令,启动mysqld实例。

注意到没有,mysqld_safe其实是在basedir中执行的,包括mysql初始化脚本mysql_install_db,也建议在basedir中执行,具体可参考:

分析MariaDB初始化脚本mysql_install_db

然后通过wait_for_pid函数进行判断,具体可见下文对于wait_for_pid函数的分析

判断完毕后,

查看$lockdir目录是否可写,可写的话,则在目录上创建一个文件。

case "$mode" in
 'start')
 # Start daemon
 # Safeguard (relative paths, core dumps..)
 cd $basedir
 echo $echo_n "Starting MySQL"
 if test -x $bindir/mysqld_safe
 then
  # Give extra arguments to mysqld with the my.cnf file. This script
  # may be overwritten at next upgrade.
  $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &
  wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$?
  # Make lock for RedHat / SuSE
  if test -w "$lockdir"
  then
  touch "$lock_file_path"
  fi
  exit $return_value
 else
  log_failure_msg "Couldn't find MySQL server ($bindir/mysqld_safe)"
 fi
 ;;

wait_for_pid函数

在利用mysqld_safe启动mysql实例后,会调用该参数

wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$?

其中$!在shell中用于获取最后运行的后台Process的PID,具体在本例中,是mysqld_safe进程的pid。

因为第一个参数是created,所以会执行test -s "$pid_file_path" && i='' && break命令。

-s file 如果文件的长度不为零,则为真

该命令的意思是如果pid文件存在,则将变量i设置为空,并退出while循环。

然后执行如下判断,

if test -z "$i" ; then
 log_success_msg
 return 0
 else
 log_failure_msg
 return 1
 fi

如果$i为空,则打印成功日志,并退出脚本,很显然,在pid文件存在的情况下,会将变量i设置为空。

再来看看pid文件不存在的情况

首先,会判断$pid是否不为空(即if test -n "$pid")

如果不为空,则代表在执行完mysqld_safe后,已经捕捉到了该进程的pid。

在这种情况下,进一步通过kill -0 "$pid"确认该进程是否存在。

kill -0就是不发送任何信号,但是系统会进行错误检查,所以经常用来检查一个进程是否存在,当进程不存在时, kill -0 pid会返回错误

如果该进程存在,则不执行任何操作,直接跳到如下操作

echo $echo_n ".$echo_c"
i=`expr $i + 1`
sleep 1

将变量i加1,并sleep 1s。

然后,继续while循环,之所以这样做,是考虑到mysqld_safe已经执行,但是mysqld实例还在启动过程中,还没创建好pid文件。

一直到$1达到$service_startup_timeout定义的时长。

如果在while循环的过程中,通过kill -0 "$pid"判断到进程已经不存在了,

则会再判断一次,如果这次判断的结果依旧是pid file不存在,且进程不存在,则会执行

log_failure_msg "The server quit without updating PID file ($pid_file_path)."

这就是大名鼎鼎的“The server quit without updating PID file”的由来。

wait_for_pid () {
 verb="$1"   # created | removed
 pid="$2"   # process ID of the program operating on the pid-file
 pid_file_path="$3" # path to the PID file.
 i=0
 avoid_race_condition="by checking again"
 while test $i -ne $service_startup_timeout ; do
 case "$verb" in
  'created')
  # wait for a PID-file to pop into existence.
  test -s "$pid_file_path" && i='' && break
  ;;
  'removed')
  # wait for this PID-file to disappear
  test ! -s "$pid_file_path" && i='' && break
  ;;
  *)
  echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path"
  exit 1
  ;;
 esac
 # if server isn't running, then pid-file will never be updated
 if test -n "$pid"; then
  if kill -0 "$pid" 2>/dev/null; then
  : # the server still runs
  else
  # The server may have exited between the last pid-file check and now. 
  if test -n "$avoid_race_condition"; then
   avoid_race_condition=""
   continue # Check again.
  fi
  # there's nothing that will affect the file.
  log_failure_msg "The server quit without updating PID file ($pid_file_path)."
  return 1 # not waiting any more.
  fi
 fi
 echo $echo_n ".$echo_c"
 i=`expr $i + 1`
 sleep 1
 done
 if test -z "$i" ; then
 log_success_msg
 return 0
 else
 log_failure_msg
 return 1
 fi
}

服务脚本stop选项

首先,判断pid文件的长度是否不为零。

-s file 如果文件的长度不为零,则为真

此时,会通过pid文件获取mysqld进程的pid,注意,不是mysqld_safe进程的pid

然后,判断mysqld进程是否在正常运行,

如果是,则通过kill $mysqld_pid的方式来关闭mysqld进程

杀死进程最安全的方法是单纯使用kill命令,不加修饰符,不带标志。

标准的kill命令通常会终止有问题的进程,并把进程的资源释放给系统。然而,如果进程启动了子进程,只杀死父进程,子进程仍在运行,因此仍消耗资源。为了防止这些所谓的“僵尸进程”,应确保在杀死父进程之前,先杀死其所有的子进程。

然后,调用wait_for_pid函数进行判断,其实,wait_for_pid函数中设置avoid_race_condition变量的目的是为了stop选项,确实有可能出现,mysqld是在检查pid file之后,检查进程是否存活之前退出的。

如果mysqld进程没有正常运行,在会打印“MySQL server process #$mysqld_pid is not running!”信息,并删除pid文件。

如果在执行stop的时候,判断pid文件的长度为0,则会打印"MySQL server PID file could not be found!"信息。

所以,在pid文件不存在的情况下,通过服务脚本执行stop选项并不会关闭mysqld进程,这个时候,就可通过kill $mysqld_pid的方式来关闭mysqld进程。

'stop')
 # Stop daemon. We use a signal here to avoid having to know the
 # root password.
 if test -s "$mysqld_pid_file_path"
 then
  mysqld_pid=`cat "$mysqld_pid_file_path"`
  if (kill -0 $mysqld_pid 2>/dev/null)
  then
  echo $echo_n "Shutting down MySQL"
  kill $mysqld_pid
  # mysqld should remove the pid file when it exits, so wait for it.
  wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$?
  else
  log_failure_msg "MySQL server process #$mysqld_pid is not running!"
  rm "$mysqld_pid_file_path"
  fi
  # Delete lock for RedHat / SuSE
  if test -f "$lock_file_path"
  then
  rm -f "$lock_file_path"
  fi
  exit $return_value
 else
  log_failure_msg "MySQL server PID file could not be found!"
 fi
 ;;

服务脚本restart选项

首先,先执行stop操作,如果stop操作成功的话,则继续执行start操作。

如果stop操作失败的话,则会输出"Failed to stop running server, so refusing to try to start."信息,并退出脚本。

 'restart')
 # Stop the service and regardless of whether it was
 # running or not, start it again.
 if $0 stop $other_args; then
  $0 start $other_args
 else
  log_failure_msg "Failed to stop running server, so refusing to try to start."
  exit 1
 fi
 ;;

服务脚本reload选项

首先,判断pid文件的长度是否为0,如果不为0,则将该文件中的值设置为mysqld_pid变量的值。

然后对该进程执行kill -HUP操作。

kill -HUP pid

pid 是进程标识。如果想要更改配置而不需停止并重新启动服务,请使用该命令。在对配置文件作必要的更改后,发出该命令以动态更新服务配置。

根据约定,当您发送一个挂起信号(信号 1 或 HUP)时,大多数服务器进程(所有常用的进程)都会进行复位操作并重新加载它们的配置文件。

如果pid文件的长度为0,则输出"MySQL PID file could not be found!"。

 'reload'|'force-reload')
 if test -s "$mysqld_pid_file_path" ; then
  read mysqld_pid < "$mysqld_pid_file_path"
  kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL"
  touch "$mysqld_pid_file_path"
 else
  log_failure_msg "MySQL PID file could not be found!"
  exit 1
 fi
 ;;

服务脚本status选项

首先,判断pid文件长度是否为0,如果不是,则读取该文件中的值,并判断pid对应的进程是否运行正常,

如果运行正常,则输出"MySQL running"

如果不正常,则输出"MySQL is not running, but PID file exists"

如果pid文件的长度为0,则试图通过mysqld的启动命令来获取其pid,

这个时候,可能存在一个mysqld程序启动了多个实例,这会导致pid_count=`echo $mysqld_pid | wc -w`大于1。

这个时候,会输出"Multiple MySQL running but PID file could not be found"信息,并退出脚本。

如果mysqld_pid为空,则会继续判断"$lock_file_path"是否存在,如果存在,

则会输出"MySQL is not running, but lock file ($lock_file_path) exists"信息。

如果"$lock_file_path"不存在,则会输出"MySQL is not running"信息。

如果mysqld_pid等于1,则会输出"MySQL is running but PID file could not be found"信息。

 'status')
 # First, check to see if pid file exists
 if test -s "$mysqld_pid_file_path" ; then 
  read mysqld_pid < "$mysqld_pid_file_path"
  if kill -0 $mysqld_pid 2>/dev/null ; then 
  log_success_msg "MySQL running ($mysqld_pid)"
  exit 0
  else
  log_failure_msg "MySQL is not running, but PID file exists"
  exit 1
  fi
 else
  # Try to find appropriate mysqld process
  mysqld_pid=`pidof $libexecdir/mysqld`
  # test if multiple pids exist
  pid_count=`echo $mysqld_pid | wc -w`
  if test $pid_count -gt 1 ; then
  log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)"
  exit 5
  elif test -z $mysqld_pid ; then 
  if test -f "$lock_file_path" ; then 
   log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists"
   exit 2
  fi 
  log_failure_msg "MySQL is not running"
  exit 3
  else
  log_failure_msg "MySQL is running but PID file could not be found"
  exit 4
  fi
 fi
 ;;

服务脚本其它选项

如果脚本的第一个参数不是上述几个选项,则会输出Usage信息。

 *)
  # usage
  basename=`basename "$0"`
  echo "Usage: $basename {start|stop|restart|reload|force-reload|status} [ MySQL server options ]"
  exit 1
 ;;

至此,mysql的服务脚本分析完毕~

总结

在通过服务脚本启动mysql的过程中,报“The server quit without updating PID file”错误,有两个条件

首先,pid文件不存在

其次,通过kill -0 $pid检查到进程并不存在

这个时候,只能通过mysql数据库的错误日志来定位。

服务脚本如果不做任何调整的话,默认的basedir是/usr/local/mysql,datadir是/usr/local/mysql/data

如果自己的mysql服务均不是默认路径,

则需要在该脚本中显式设置

经测试,需设置如下几处:

1. 设置basedir和添加conf变量

其中,conf指的是mysqld的配置文件,建议配置文件中显式指定basedir和datadir的值。

在这里,datadir可不设置,因为datadir可通过配置文件来获取。

但是basedir必须要指定,因为要首先根据basedir来判断my_print_deefauts命令

basedir=/usr/local/mysql-advanced-5.6.23-linux-glibc2.5-x86_64
datadir=
conf=/usr/local/mysql-advanced-5.6.23-linux-glibc2.5-x86_64/my_3308.cnf 

2. 第256行,添加extra_args=" -c $conf"

extra_args=" -e $basedir/my.cnf.bak"
if test -r "$basedir/my.cnf"
then
 extra_args="-e $basedir/my.cnf"
else
 if test -r "$datadir/my.cnf"
 then
 extra_args="-e $datadir/my.cnf"
 fi
fi
extra_args=" -c $conf"

3. 修改285行mysqld_safe的启动参数

 $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &

修改为,

  $bindir/mysqld_safe --defaults-file="$conf" --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 &

主要是添加了--defaults-file选项

以上所述是长沙网络推广给大家介绍的深度解析MySQL启动时报“The server quit without updating PID file”错误的原因,希望对大家有所帮助,如果大家有任何疑问请给我留言,长沙网络推广会及时回复大家的。在此也非常感谢大家对狼蚁SEO网站的支持!

Copyright © 2016-2025 www.dzhlxh.cn 金源码 版权所有 Power by

网站模板下载|网络推广|微博营销|seo优化|视频营销|网络营销|微信营销|网站建设|织梦模板|小程序模板